It is a polyester polyurethane resin-based, two-component, resilient and solvent-free mastic containing solids in high volume.
Fors port floors which are formed by cast of rubber granules on site or lay of granules on the is used to:
- provide imperviousness;
- fill pores and cavities and
- make he rubber blanket floor suitable for coating of polyurethane – self levelling.
- Easy to apply thanks to its thixotropic structure.
|Color||: Gray, Beige, Oxide Red|
|Density||: 1,46 ± 0,05 kg/lt (A+B)|
|Mix Ratio||: 7:1 (A:B – by weight))|
|Solids by volume||: %100 (A+B)|
|Pot Life (+10°C)||: 60 minutes|
|(+30°C)||: 30 minutes|
|Wait Time Between Coats||:24 hours / at 20°C|
|Ready for Light Traffic||: 2 days / at 20°C|
|Full Cure||: 7 days / at 20°C|
It is a two-component product and it should, therefore, be propared at the mix ratio specified for the quantity to be used, taking into consideration the pot life. For a homogenous mixture, make sure that the product temperature should not be less than 15°C. Component A should be stirred by itself by use of a mechanical mixer quickly and then the hardener (Component B) should be added, taking care of the mix ratio. Components A and B should be stirred for minimum 3 minutes until you have a homogenous mixture.
When ready for application, the product is applied by splayed spud. Application of active or stabile pressure to on adherend surfaces is important for adhesive performance. If applicated pressure , all adhere surface contact with adhesive and to be homogeneous transfer to surfaces.
Cleaning Of Tools
Residual adhesive and tools can be cleaning with cellulosic or polyurethane thinner currently dry adhesive.
A 16-kg set of NOVATECH FLOOR POR SEALER 4065 consists of Component A in one pail of net 14 kg and Component B in one galloon of net 2 kg.
Store the product in a cool and dry place. Shelf life of the product is 1 year for Components A and B when stored properly in the original container unopened.