Epoxy Transparent Protective Varnish

Mixing Procedure:

It is a two-component product and it should, therefore, be propared at the mix ratio specified for the quantity to be used, taking into consideration the pot life. For a homogenous mixture, make sure that the product temperature should not be less than 15°C. Component A should be stirred by itself by use of a mechanical mixer quickly and then the hardener (Component B) should be added, taking care of the mix ratio. Components A and B should be stirred for minimum 3 minutes until you have a homogenous mixture.
Surface Application:

After made ready to apply, the mixture is applied by roller or airless spray to saturate the surface. Recommended consumption is 100-150 g/m2 in for 2-3 coats. Wait time between the coats is minimum 4 hours (20°C) and there is no limit for the maximum. It is very important that the second coat should be applied specified above. Lt reaches to a full mechanical and chemical within the time for overcoating strength in about 7 days.
Clean Up:

Cellulosic or Polyurethane.