It is a polyurethane resin-based, two-component, solvent-free, polyurethane adhesıve. It provides good adhesion resistance in wide range of applications. Water and solvent free.
- Suitable for all parquet and wood flooring
- Light and heavy -duty wood block flooring
- Laminate floors
- Mosaic parquet, solid wood parquet, multi-layer parquet
- It can be used also for built-in heated floorings,
- Easily spreadable with a notched trowel
- It provides highly durable and elastic bonding
- Fast curing, pedestrian traffic time is short
Finish | : Putty |
Color | : Dark beige, green |
Density | : 1,60 ± 0,05 kg/l (A+B) |
Mix Ratio | : 9:1 (A:B – by weight) |
Solids by Volume | : 100% (A+B) |
Pot Life (+10°C) | : 90-120 minutes |
(+25°C) | : 60-80 minutes |
Light Traffic (20˚C) | : 24 hours |
Fully Cured (20˚C) | : 7 Days |
Shore D Hardness | : 55 |
Application Method | : Notched Trowel |
Surface Preparation: Application surface should be free of any damages. Surface should have compression strength of minimum 25 N/mm² and pull-off test result of minimum 1,5 N/mm2. Age of new concrete should be minimum 28 days depending on the season and the concrete surfaces should have a maximum moisture content of 5-6%. It should be free of any loose and friable particles, oil and paint leftovers and cement grout. Wide cracks and defects should be repaired beforehand. Any cement shell and bright screed on the concrete surface should be cleaned up by equipment such as sandblasting machine, hacking and wiping machine with diamond drum and impact grinding machine and it should then be roughened and wiped. Remove all dust from the surface by using industrial type vacuum cleaner.
Concrete surfaces in contact with the soil to be coated should be previously treated with water and water vapor sealants.
Application Conditions:
– Relative humidity of the air should be 80% maximum and the application (ambient and surface) temperature should be between 5 and 35 °C.
– In case it is applied outdoors, it should not be rainy 24 hours before and after and during the application.
– Surface temperature should be 3°C above the dew point. (Please contact our company for the Ambient temperature-Ambient Moisture-Dew Point table.
Mixing Procedure: It is a two-component product and it should, therefore, be prepared at the mix ratio specified for the quantity to be used, taking into consideration the pot life. For a homogenous mixture, make sure that the product temperature should not be less than 15°C. Component A should be stirred by itself by use of a mechanical mixer quickly and then the hardener (Component B) should be added, taking care of the mix ratio. Components A and B should be stirred for minimum 3 minutes until you have a homogenous mixture.
Surface Application: When ready for application, the product is applied by notched trowel. On adhered surfaces, applying movable or fixed pressure is important for performance. With pressure, all surfaces comes into contact with the adhesive. And it is transferred to the surface uniformly.
Clean Up: When adhesive is wet, can be made with polyurethane or cellulosic thinner. Hardened adhesive can only be removed mechanically.
Note: This product is for professional use only. The information in this publication relies on our knowledge and experience that we have gained professionally. However,
the information given here does not relieve the users of their responsibility to test our products for compliance with their specific applications. As application and use
of our products is beyond our control, the recommendations here are not warranted by us. The users are obliged to keep our products under consideration at their
own specific conditions and all responsibility lies with them. Technical data sheets of all our products are regularly updated. The users are liable to get the latest version
of them.
A 10 kg set of HELFLEX consists of Component A in one pail of net 9 kg and Component B in one gallon of net 1 kg.
Store the product in a cool and dry place. Shelf life of the product is 1 year for Components A and B when stored properly in the original container unopened.
Refer to Material Safety Data Sheet (MSDS) prepared as per the related EU directives before use.
Related products
Company
Parquet Products
Waterproof Products
Contact Information
Head Office Address
Orucreis Mah.Tekstilkent Cad. No: 10V Blok No:214 (2. Kat) Tekstilkent Ticaret Merkezi Esenler / ISTANBUL / TURKEY
Factory Address
Buyukbakkalkoy Mahallesi Yakacik Yolu Sokak No: 2/1 Merkez
Maltepe / ISTANBUL / TURKEY