Density DIN 53217 |
: 1,09 g/cm3 |
Viscosity DIN53018/1+2 |
: 3500 mPa-s |
Solvent free, moisture curing one component polyurethane binder with good long term elasticity, Especially designed for the production of base leyars for running tracks, playgrounds, tennis courts etc..
Binder is designed for use on elastic base leyars for the production of different kind of sports surfaces like running tracks, playgrounds, tennis courts and shock pads for pitches
Curing takes place at ambient temperature by reaction with atmospheric moisture. Higher temperatures and moisture will shorten the cure time. The surface can be walked on after 12 – 18 hours at 20°C. The temperature should not fall below 10°C during curing.
In barrels of 200 kg.
The binder component must be protected against humudity and stored above 5°C. The ideal storage temperatur is 15-25°C.
Material safety data sheet should be read very carefully before use.
Notice
The information contained in this bulletin is, to the best of our knowledge, true and accurate, bul any recommendations or suggestions which may be made without guarantee, since the conditions of use are beyond our control. Furthermore nothing contained hereinof legal requirements has to be taken.
Related products
Company
Parquet Products
Waterproof Products
Contact Information
Head Office Address
Orucreis Mah.Tekstilkent Cad. No: 10V Blok No:214 (2. Kat) Tekstilkent Ticaret Merkezi Esenler / ISTANBUL / TURKEY
Factory Address
Buyukbakkalkoy Mahallesi Yakacik Yolu Sokak No: 2/1 Merkez
Maltepe / ISTANBUL / TURKEY