HELLTEC FLOOR RUBBER TILE ADHESIVE is a two-component, elastic adhesive based on polyurethane that does not contain solvents.
Bonding rubber tiles on various surfaces
Bonding of all types of parquet and veneer
Metal, ceramic, concrete and wood surfaces
Provides excellent adhesion where applied.
It is resistant to adverse weather conditions.
- Water resistant
- Solvent free and odorless.
- Flexible bonding.
|View||: Beige, green or in desired colors|
|Viscosity (cps)||: Thixotropic|
|Density(25°C) (gr/cm3):||: 1,52 (Component A), 1,2 (Component)|
|Solid content (%)||: 100|
|Mixing ratio||: 7/1: A/B (weight)|
|Open time (minute)||: 25-40 (23°C 50 nem)|
|Shell tying time (hours)||: 1-2 (23°C %50 nem)|
|Full strength(day)||: 7 day|
|Resistance to film||: Water and heat resistant|
|Sarfiyat||: (kg/m2) 0,9-1.1(1 mm kalınlıkta)|
|Shelf life||: 12 moon|
Component A and Component B are mixed in an amount of 7: 1 using a suitable mixer. At least 2 minutes It is blended and spread to the ground until a uniform color is obtained. Weak mixing leads to adhesion without curing and loss of adhesive strength Adhesive is applied to the floor with a notched trowel or a suitable material. Purification can be performed using ethyl acetate, butyl acetate, or acetone. Do not apply on wet floors. The application surface must be free from dust, dirt and oil. Adhesive 25-40 min. It has a working time, but it can vary depending on high or low temperature and humidity conditions. It is recommended to use a mixed product during working hours.
Irritating to eyes, skin and lungs. It is inconvenient to swallow. Wear protective glasses and gloves during application.
24 kg set: component A – 21 kg, component B – 3 kg
Store in a cold and dry place.