Two-component polyurethane anti-damp&dust proofer impegrenation product, with a high adhesion capacity for a number of materials. Ideal for damp&dust proofing, all kinds of concrete floors including onto smooth and compact surfaces.
Helltech Floor is mainly used as a primer for polyurethane based floor coating systerns and adhesives, Helltech Floor is very compatible with mineral substrates and has very strong binding capacity to mineral substrates. Helltech Floor prevents low quality concrete surfaces from sanding and dusting by strengthening concrete surfaces and thus gives more tough surfaces for floor coating and adhesive applications due to surface stabilizer power.
- Flexible and no deformation from -10°C to +120°C
- Restores concrete surfaces by preventing from sanding and dusting
- High penetration capability into the concrete
- Eliminates blisters and pinholes
- Increased adhesion to concrete
Finish | : Gloss |
Color | : Clear Liguid |
Density | : 1,06 ± 0,05 kg/l (A+B) |
Solids by Volume: | : %50 (A+B) |
Touch to dry 20C | :1-1,5 hrs |
Hard to dry 20C | : 6-8 hrs |
Wait Time Between Coats (+10C) | : 24 hours / at 20C |
(+20C) | : 12 hours / at 20C |
Pot Life | :2 hrs |
Coverage | : 100-150 g/m2 |
Ready for Light Traffic | :24 hours / at 20C |
Full Cure | : 7 day / at 20C |
Packaging | : 4,5 kg |
These are typical values and there may be deviations
Helltech Floor can be applied by paint-roller or paint-brush to the pretreated surfaces, Depending on the surface absorbance and respecting the re-coat intervals, more than one coat can be applied. After at least 3 hours or within 12 hours, application of 2 component polyurethane based adhesive such as Helltech Floor or polyurethane based floor coating or polyurethane based waterproof liguid applied membrane should take place. Combine two part of Component “A” and one part Component “B”, by weight, in the guantity desired. Mix Helltech Floor with a low speed drill a for two minutes. Avoid entrapping air while mixing. Apply immediately after mixing
Related products
Company
Parquet Products
Waterproof Products
Contact Information
Head Office Address
Orucreis Mah.Tekstilkent Cad. No: 10V Blok No:214 (2. Kat) Tekstilkent Ticaret Merkezi Esenler / ISTANBUL / TURKEY
Factory Address
Buyukbakkalkoy Mahallesi Yakacik Yolu Sokak No: 2/1 Merkez
Maltepe / ISTANBUL / TURKEY