Nova Filler is a two-component polyurethane filler for wooden floors characterised by an extraordinary covering ability. Furthermore, it has very good sanding properties, it can be overcoated with any kind of lacquer and it does not sink in the time. Very high build and easily sanded.
|Mixing ratio by weight||: 1/1|
|Application temperature||: +10C ÷ +25C|
|Thinning (if necessary)||: Cellulosic thinner|
|Coverage||: 100-120 g/m2 at 20C and 65% H.R.|
|Dust dry||: 30 mins. at 20C and 65% H.R.|
|Fingerprint dry||: 2 hr. at 20C and 65% H.R.|
|Sandpapering||: 12 hr. at 20C and 65% H.R.|
|Application||: Roller / Brush|
|Overcoating without sanding||: 2-4 hr. at 20C and 65% H.R.|
|Pore filling||: Excellent|
|Storage stability||: 1 year|
|Packaging||: 5 lt set|
Sand and fill the floor, removing all wax, oil or existing finish, After final sanding or screening, vacuum and tack thoroughly. Mix the two components in the prescribed ratio and wait 10 minutes before applying, to allow pre-reaction, Apply the sealer by pad, brush, roller or airless-spray. When dry, abrade and eliminate dust carefully. Once the film has hardened, the treated area will appear slightly glossy due to the high coating power of filler Nova Filler. After 12 hours, it is possible to sand the surface with paper or screen grit 150/180 and apply with one of our solvent -based finishes of the Polypar, Nova and Gala varnish.