GALA-2K Polyurethane Glossy, Satin And Matt Varnish For Parguet

GALA

2K Polyurethane Glossy, Satin And Matt Varnish For Parguet

Description

Polyurethane two-component varnish on solvent base, recommended when â glossy, satin and matt finish is reguired for parguet floors standing heavy wear. It is, elastic, resilient and scratch-resistant lacguer, highly recommended when a matt finish is desired for parguet floorings yields weli, resists highly to abrasion, dries rapidiy and does not alter the natural beauty of the wood. And a very good resistance to washing with water and neutral detergents

Characteristics

Mixing ratio by weight	: 1/1
Application temperature	: +10C ÷ +25C
Coverage	: 100-120 g/m2 at 20C and 65% H.R.
Dust dry	: 1 hrs. at 20C and 65% H.R.
Fingerprint dry	: 4 hr. at 20C and 65% H.R.
Sandpapering	: 24 hrs. at 20C and 65% H.R.
Pot life	: 2 hrs. at 20C and 65% H.R.
Gloss level	: 90 glossy, 50 satin, 25 matt
Overcoating without sanding	: 24 hr. at 20C and 65% H.R.
Application	: Roller / Brush
Storage stability	: 1 year
Packaging	: 5 lt set

1 onto wet film of 90 hardened at 20C and 65% R.H. for 7 days

Application

After being mixed in the ratio above mentioned and wait 15 mins. to allow prereaction Gala varnish has to be applied onto the wood flooring after having sanded, puttied and well vacuum cleaned it. The product may be applied with brush or roller keeping to the over-varnishing times. Should thinning seem necessary use our thinner cellulosic. Apply one coat of sealer Polypar/ Oilabond followed by two coats of Gala varnish to finish or apply one coat of Nova Filler followed by one coat of Gala varnish to finish. In the case of exotic woods apply Gala varnish directiy without a sealer, using the same Gala varnish thinned by 20-30% with thinner cellulosic instead of filler for the first coat.